PROJECT 04 - Exercise producing a complete value grayscale - Mounted on White presentation board

From these 96 total swatches, which are 2 carefully measured gridded sheets, 1'x1' squares, you will create a value scale representing TEN EVEN steps from black  to white. black and white with eight even incremental changes in-between.

Mount your swatches on presentation board for critique. Result is 1"x1" squares mounted on a 2"x11" white board.

Demonstration video

https://www.youtube.com/watch?v=mTPwkJI1I9g

https://www.youtube.com/watch?v=B-jkKJmSW_8

Materials

-Mars Black and Titanium White acrylic

-9x12 inch bristol board x 2

-Pallet knife

-1" Brush (bright)

-2 cups (for water)

-Paint palette (aluminum foil)

-Paper Towels

Process/Schedule

First Class Period

1. Lay out grid (to create your swatches) on bristol board. 2 sheets total if you succeed to create a wide range of well painted solid values. You will need a 3rd page.
2. Grid will have a total of 24 rectangular swatches per page, each measuring 1"x2" with 1/2" space in-between each rectangle. 3 swatches across top of 9"x12" page and 8 swatches down the length of page. Total swatches per page = 24
3. Lay separatley black and white paints out on palette, and mix paints starting from black (or white) and adding incremental amounts of the opposite color. Mix paint throughly with palette knife and then brush until well mixed and you have a solid tone and brush-in swatches to fill the entire page. Must paint with smooth strokes, no streaks and an opaque thick coat of paint for full coverage. may have to use a couple of coats of paint to achieve a smooth clean opaque gray tone.
4. Each swatch should have consistent color, and be a unique value. Must paint 3-4 of same values. The more variety of values you paint e, the easier it will be to select 11 strong swatches to create the final value scale.
5. The goal is to create as many distinct values as you can. Fill in each rectangle of your grid with a solid value. Paint slightly beyond the borders. you must still be able to see original guides as you will be carefully cutting out each swatch one by one with an exact blade.
6. Be sure you have all 10 values represented from from black (straight from the tube) progressing to middle gray, and continuing through light grays toward bright white (also straight from the tube). 
7. Clean your workspace and all your painting materials (brushes, palettes, etc)

Second Class Period

1. Finish painting your two pages of value swatches. You may need more than 2 pages.
2. Lay out your presentation board, using the guidelines provided below.
3. With a metal ruler, and cutting board, carefully cut-out your painted swatches so they are exactly the same size (1" x 1"). Cut very carefully following the guides you measured out. Makes life easier and cuts will be much more exact. Make sure cuts are clean, by using a new x-acto blade. NO CUTTING DIRECTLY ON TABLES. Cutting boards must be used. These have to be as close to perfect as possible.

Homework

1. Finish laying out your black presentation board, using the guidelines provided. 
2. Bring your presentation board to class, along with your x-acto knife. 
3. Finish cutting out your swatches, if not finished in class.
4. You may first glue your swatches on a strip of 1"x11" as a safety net to make sure all swatches are glued right next to each other and follow a straight pattern vertically.

Final Class Period

1. Select the best swatches from your entire page that represent 11 consistent steps in value. 
2. Show your presentation board (with layout lines/grid) to instructor. Once it has been given the ok, proceed with mounting of swatches. DO NOT PROCEED UNTIL YOUR LAYOUT HAS BEEN APPROVED.
3. Using rubber cement, glue stick or regular glue, carefully glue swatches to presentation board. There should be no gaps between swatches, and all swatches should be perfectly aligned. 
4. Let rubber cement dry slightly, and remove any excess glue with the appropriate eraser. 
5. Neatly Label (name and date) your work with hard pencil in lower right-hand corner. 
6. Cut and tape tissue paper sheet to act as protector. 

The final 30 mins of class will be reserved for critique.

Rubric

You will be evaluated on the following:

1. Laying out your bristol board into an even grid (even measurements, straight lines).

2. Your ability to mix the paints evenly. 

3.  Painting swatches that are free of brush strokes, or excessive paint build up.

4.  Filling up your entire page with different/distinct values.

5. Choosing the best 10 swatches that represent even steps from black to white. 

6. Laying out your presentation board neatly (consistent measurements, and centered)

7. Cutting out your swatches, and mounting them to the presentation board. 

8. Removing excess glue and having all your swatches line up evenly. 

Layout Measurements

Below is the sample of the GRID for the Value scales. you need to be sure and cut the 1"x10" support strip to glue your swatches and also mount them on the 2"x11" thicker mounting board with a 1/2" boarder all around as we had done in class. if you have questions please ask me or communicate with your class mates for information.